Ruger 77/50 209 Conversion Kit
During wet weather, No. 11 caps don't always provide enough fire to
consistently ignite the powder charge, especially if you are using pellets. The
Ruger 77/50 209 Conversion Kit gives you the ability to fire those
hotter 209 primers, virtually eliminating misfires and delayed ignitions.
Click graphic above to access owner's
manual.
This kit converts your Ruger 77/50 to allow the use of 209 shotgun primers.
At last,
those hard to find Ruger 77/50 209 Conversion Kits are here. These
Ruger 77/50 209 replacement
Conversion Kits will also allow you to use the new Variflame Primer Adapters; which
are much cleaner than 209 primers and improve your accuracy. Never
have the uncertainty of a misfire with a #11 cap! You won't believe the difference. Before,
you heard that typical pop then bang
of your muzzleloader, but not after switching to a Ruger 77/50 209 replacement nipple.
If you wanted to use 209 primers and the new Blackhorn 209 powder, this is
your chance.
The Ruger 77/50 209 breach plug be taken out and cleaned using our #1
Cleaner. Convert your Ruger 77/50 209 muzzleloader to fire 209s or
the Variflame Primer Adapters. This will provide more consistent performance and reduce delays
between the cap flash and powder ignition.
Ruger 77/50 209
Conversion Kit $59.95 each.
The kit contains:
- Firing pin
- 209 nipple
- De-priming tool
- Bolt tool
You will also need a 7/16 socket and extension and the tool provided with your Ruger arm.
Complete installation instructions come with the kit. As always, when
working on your Ruger arm, be certain you rifle is unloaded to prevent injury to
person or property.
|
