Super Jag and Super RAT
 The knurled length of the Super Jag and Super RAT is increased by .150 of an inch and the diameter is
increased by .010 of an inch to better hold a patch. Instead of brass
threads there are two steel threaded nipples; one to attach the Super
Jag to your ramrod and the second to remove the jag head from the
extension in the event that your preference is to keep the jag attached
to your ramrod at all times The final touch was having the jag head
milled out to also act as a bullet pusher for all Precision Rifle
bullets. The result is an indestructible brass ramrod extension, bullet
pusher, cleaning jag; Super Jag. New! Super
RAT with a rotating head! Read story below. Have you ever experienced a flyer that you could not explain? The only thing that you noticed was that when you pushed the sabot down the barrel, it did not go down smoothly, but with a "stutter motion". As you continue to shoot you get that same "feel" on another load. You are not surprised when that bullet is also a flyer and without hitting anywhere near the last flyer. Upon further examination, what appears to be causing this is the Super Jag and the bullet have locked up inside the barrel. That "stutter feeling" was caused when the sabot was pushed over the lands and grooves rather than rotating in the lands and grooves. By backing the Super Jag off the face of your range rod a couple of treads, you can allow the Jag head to rotate if the bullet locks up. This appears to solve the problem, but there must be a better solution. Enter the "Super RAT" (Rotating Accuracy Tool). The world's first jag with a rotating head! Here is a rotating bullet pusher, ramrod extension, cleaning jag all in one Solid Brass U.S. Made tool. Here are some the advantages to a rotating head jag. *keeps the bullet in the lands and grooves while
loading. |
